rollerscreed
@rollerscreed
Profile
Registered: 2 years ago
1. Before using the concrete spin screed level, you need to make sure that the ground is even and smooth. If there are any bumps or irregularities, they need to be removed before using the tool.
2. Once the surface is prepared, you can start using the concrete spin screed level. To do this, you need to put the tool on the ground and then start moving it back and forth.
3. As you move the tool back and forth, it will start to level out the surface of the ground. You need to keep moving it until the entire area is covered.
4. Once the whole area is covered, you can then stop moving the tool and let it sit for a few minutes. This will allow the concrete to set and harden.
5. After a few minutes, you can then remove the tool from the ground and start using it again. You need to keep moving it back and forth until the entire area is covered.
6. Once the whole area is covered, you can then stop moving the tool and let it sit for a few minutes. This will allow the concrete to set and harden.
7. After a few minutes, you can then remove the tool from the ground and start using it again. You need to keep moving it back and forth until the entire area is covered.
8. Once the whole area is covered, you can then stop moving the tool and let it sit for a few minutes. This will allow the concrete to set and harden.
9. After a few minutes, you can then remove the tool from the ground and start using it again. You need to keep moving it back and forth until the entire area is covered.
10. Once the whole area is covered, you can then stop moving the tool and let it sit for a few minutes. This will allow the concrete to set and harden.
11. After a few minutes, you can then remove the tool from the ground and start using it again. You need to keep moving it back and forth until the entire area is covered.
12. Once the whole area is covered, you can then stop moving the tool and let it sit for a few minutes. This will allow the concrete to set and harden.
13. After a few minutes, you can then remove the tool from the ground and start using it again. You need to keep moving it back and forth until the entire area is covered.
14. Once the whole area is covered, you can then stop moving the tool and let it sit for a few minutes. This will allow the concrete to set and harden.
15. After a few minutes, you can then remove the tool from the ground and start using it again. You need to keep moving it back and forth until the entire area is covered.
16.Once the whole area is covered, you can then stop moving the tool and let it sit for a few minutes. This will allow the concrete to set and harden.
hydraulic roller screedhttps://www.concrete-laser-screed.com/roller-screed/gpj-300h-hydraulic-roller-screed/
battery roller screed https://www.concrete-laser-screed.com/roller-screed/dg-200l-battery-roller-screed/
electric roller screed https://www.concrete-laser-screed.com/roller-screed/the-gpj-300d-electric-roller-screed/
gas powered roller screed https://www.concrete-laser-screed.com/roller-screed/gpj-300y-gas-roller-screed/
Website: https://www.concrete-laser-screed.com/roller-screed
Forums
Topics Started: 0
Replies Created: 0
Forum Role: Participant
@rollerscreed
Profile
Registered: 2 years ago
1. Before using the concrete spin screed level, you need to make sure that the ground is even and smooth. If there are any bumps or irregularities, they need to be removed before using the tool.
2. Once the surface is prepared, you can start using the concrete spin screed level. To do this, you need to put the tool on the ground and then start moving it back and forth.
3. As you move the tool back and forth, it will start to level out the surface of the ground. You need to keep moving it until the entire area is covered.
4. Once the whole area is covered, you can then stop moving the tool and let it sit for a few minutes. This will allow the concrete to set and harden.
5. After a few minutes, you can then remove the tool from the ground and start using it again. You need to keep moving it back and forth until the entire area is covered.
6. Once the whole area is covered, you can then stop moving the tool and let it sit for a few minutes. This will allow the concrete to set and harden.
7. After a few minutes, you can then remove the tool from the ground and start using it again. You need to keep moving it back and forth until the entire area is covered.
8. Once the whole area is covered, you can then stop moving the tool and let it sit for a few minutes. This will allow the concrete to set and harden.
9. After a few minutes, you can then remove the tool from the ground and start using it again. You need to keep moving it back and forth until the entire area is covered.
10. Once the whole area is covered, you can then stop moving the tool and let it sit for a few minutes. This will allow the concrete to set and harden.
11. After a few minutes, you can then remove the tool from the ground and start using it again. You need to keep moving it back and forth until the entire area is covered.
12. Once the whole area is covered, you can then stop moving the tool and let it sit for a few minutes. This will allow the concrete to set and harden.
13. After a few minutes, you can then remove the tool from the ground and start using it again. You need to keep moving it back and forth until the entire area is covered.
14. Once the whole area is covered, you can then stop moving the tool and let it sit for a few minutes. This will allow the concrete to set and harden.
15. After a few minutes, you can then remove the tool from the ground and start using it again. You need to keep moving it back and forth until the entire area is covered.
16.Once the whole area is covered, you can then stop moving the tool and let it sit for a few minutes. This will allow the concrete to set and harden.
hydraulic roller screedhttps://www.concrete-laser-screed.com/roller-screed/gpj-300h-hydraulic-roller-screed/
battery roller screed https://www.concrete-laser-screed.com/roller-screed/dg-200l-battery-roller-screed/
electric roller screed https://www.concrete-laser-screed.com/roller-screed/the-gpj-300d-electric-roller-screed/
gas powered roller screed https://www.concrete-laser-screed.com/roller-screed/gpj-300y-gas-roller-screed/
Website: https://www.concrete-laser-screed.com/roller-screed
Forums
Topics Started: 0
Replies Created: 0
Forum Role: Participant
Forgot password? Reset it here.
Don't have an account? Sign up
Get in touch
Your voice is vital to the National Commission. Get involved by emailing [email protected]
Your voice is vital to the National Commission. Get involved by emailing [email protected]
Keep up to date
Sign up here to be kept up to date with the latest National Commission news